Replacement Battery Boxes and Reproduction Vintage Battery Labels
for Solid State Zenith Trans-Oceanic and Other Zenith Transistor Radios
International customers please read International Customers before ordering. International orders placed without prior approval will be refused and refunded.
Battery Boxes and Vintage D-Cell Label Sets for Transistor Trans-Oceanics
Replace your missing or corroded battery box with our fully functional replacement battery box. Fits the solid state Zenith Royal 1000, 1000D and 3000 models, including the -1 models
And for an even more authentic look, apply our reproduction vintage D cell labels to your modern alkaline D cells. Set includes 9 replica vintage labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application to your modern D cells. Use in your Royal 1000, Royal 3000, 7000, and R7000 series Trans-Oceanic, or any vintage portable using D cells. Note that using these reproduction vintage labels may cause a tight fit in the battery holder, thereby preventing the cells from from making good contact with the positive terminal of the battery holder. It may be necessary to manually push the batteries by hand against the positive terminal to ensure good contact.
Replacement Battery Box for Zenith Royal 1000 and Royal 3000 series transistor Trans-Oceanic radios
Like the original, our replacement battery box uses nine D cells to power your radio's chassis and dial light. The battery box uses three 3x1 D cell holders attached to a styrene plastic backboard. The battery box connects to the radio's OEM connector with a 3D printed reproduction connector featuring an index mark so there's no more fumbling to mate the connector with the male pins on the radio. Eight of the D cells power the chassis and the ninth cell powers the dial light. Instructions included.
Replacement battery box for Zenith Trans-Oceanic Royal 1000 and Royal 3000 series radios. Requires nine D cells, not included. |
| | Temporarily Unavailable | |
Reproduction Vintage D-Cell Labels
Vintage 1950's Zenith Radio A Battery Z2NL D-Cell Label Set of 9 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. Perfect for solid state Zenith Trans-Oceanics Royal 1000, Royal 1000-1, Royal 1000D, Royal 3000, and Royal 3000-1. Also perfect for your Zenith Royal 2000 AM/FM portable transistor radio |
| | Temporarily Unavailable | |
Vintage 1960's era Zenith Radio A Battery Z4NL D-Cell Label Set of 9 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. Perfect for all transistor Zenith Trans-Oceanics. |
| | Temporarily Unavailable | |
Vintage RCA VS036 Radio A Battery "Special Radio Mix" D-Cell Label Set of 9 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. For all transistor Zenith Trans-Oceanics and other vintage radios using D batteries. |
| | Temporarily Unavailable | |
Vintage Eveready No. 1050 "Transistor Battery" D-Cell Label Set of 9 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. 1960's era. For all transistor Zenith Trans-Oceanics and other vintage radios using D batteries. |
| | Temporarily Unavailable | |
Vintage Ray-O-Vac No.13 "Transistor Battery" D-Cell Label Set of 9 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. 1960's era. For all transistor Zenith Trans-Oceanics and other vintage radios using D batteries. |
| | Temporarily Unavailable | |
Vintage Eveready D99 D-Cell Label Set of 9 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. Mid-1950's era. The D99 was Eveready's heavy duty consumer D cell. For Royal 1000 Zenith Trans-Oceanic and other vintage radios using D batteries. |
| | Temporarily Unavailable | |
Vintage Zenith "Transistor Radio Battery" AA Cell Label Set of 15 labels printed on Epson Photo Quality paper with an adhesive backing for easy cut, peel, and stick application. 1960's era. For all transistor Zenith 500 series radios and other vintage radios using AA batteries. |
| | Temporarily Unavailable | |
Click Here for Product Instructions and Technical Information