8G005 series Trans-Oceanics, like the 7G605, have a six tube filament string, and also require an additional 1.5 volts in the A supply. Zenith provided a stronger, single cell 1.5 volt battery, the Z-1, in place of the paralled D cells used in the 7G605. In the 600 series, the Z-1 simply powers a separate the dial light circuit, even when the radio is used on AC power. None of the 500 series radios, G500 or H500 models, require a supplementary battery. A quality replica handbuilt from PCV plastic, it is a near match in dimensions to the orginal Z-1. Approximately 4" long. There is some variation in battery compartment sizes among all models of Trans-Oceanics depending on the size stops Zenith used during production. If you encounter a problem fitting your battery box or Z-1 in your radio, we can customize a box or Z-1 for you. Requires one C cell, not included.

Click here for more photos.

Replica Early Style Zenith Z-1 1.5v battery
		Temporarily Unavailable

Replica Late Style Zenith Z-1 1.5v battery.
		Temporarily Unavailable

Replica Eveready 960-P 1.5v battery
		Temporarily Unavailable

Replica Early style RCA VS 070 1.5v battery
		Temporarily Unavailable

Replica Late style RCA VS 070 1.5v battery
		Temporarily Unavailable

Use to replace the label on our Z-1 battery if needed, or can be used with your own homemade Z-1 battery or even to replace the label on an original Z-1 battery.

Replacement Ealy Style Label for Z-1 Battery
		Temporarily Unavailable

Replacement Label for Late Style Z-1 Battery
		Temporarily Unavailable

---

Replacement Label for Eveready 960-P Battery
		Temporarily Unavailable

---

Replacement Early Style Label for RCA VS 070 Battery
		Temporarily Unavailable

---

Replacement Late Style Label for RCA VS 070 Battery
		Temporarily Unavailable

---

---

---

Z-985 Style Reproduction Battery Boxes, Connectors, and Battery Holder Kits

Z-985 Replacement Battery Boxes for Jim Poitivient's "ABBattery" Power Supply